Roofers will have to deal with scorching heat, bitter cold, and monsoon rains to get the job done. During the summers and winters, most parts of the United States suffer harsh weather.

To battle snow and ensure optimum insulation at your home, you must hire professionals to install solid roofing to protect your properties.

This blog will give you a step-by-step rundown on laying a new roof and what a typical roofer’s day looks like.

1. Inspect The Current Roof

Roof inspectors work in groups, and they coordinate their schedules to make roof inspections easier across their service radars. The length and kind of roofs determine how long it takes to inspect them.

Certified roof contractors have the necessary education and skills to recognize roofing issues. Roofing professionals look for rough surfaces, clawed shingles, and rusted metal roofing while inspecting roofs.

These signs suggest that your home’s roofing needs to be replaced. A clogged chimney and debris-laden gutters, in addition to roofing materials, might degrade the roofing sealant. Only a roofing specialist can determine how badly your roof needs replacement.

2. Get All Your Tools Ready

Roof maintenance and repair is one of the most dangerous jobs in the United States, as it entails falling, working on slick slopes, and keeping balance while working. If you didn’t have modern roofing tools on hand, the job would become even more difficult.

Roofing tools help with heavy labor such as roof repair, installation, and maintenance by reducing manual effort. Roofing tools improve workplace efficiency, allowing roofing crews to execute new roof installations and replacements in less time than normal.

Several roofing tools, such as roofing shovels, magnetic brooms, roofing hammers, and a hemming tool, have a wide range of capabilities. They help with roof repair, installation, and inspections.

A person using a measurement tape on a roof

3. Remove The Old Shingles

If you don’t remove the old roof first, you won’t be able to correctly install a new sheet of roofing  Pound the old nails flat or remove them before placing a new sheet to ensure your new shingles don’t rip apart by protruding nails.

Remove any movable objects near your property to minimize the risk of damage due to any mishap. Get tarps to cover the landscaping and plants and catch those gazillion nails that might fall off during the installation.

4. Cleaning The Gutters

After tearing off a section, your contractors will clean the gutters to ensure any leaves, debris from tear-off, or any potential blockage is removed. If not cleaned properly, they might damage your roofing, leading to costly repairs.

5. Underlayment Begins

After the tear-off and cleaning the gutters, your contractor is ready to install your new roof. They’ll systematically work their way, tearing off portions as they go. They’ll install the drip and lay the underlayment in sections. Once the whole roof is covered with shingles, you cap the ridge.

Bird’s-eye-view of a roof during daytime

6. Install The Vents For Roof Ventilation

Roof vents are essential to increase the life of your roofs. They help reduce energy costs by keeping the internal temperatures under control. They’ll also protect your shingles from cracking by providing it with the structural support.

Your roof’s lifespan can be drastically reduced if you don’t ventilate your attic and roof properly. Mold, rot, and condensation are all possible outcomes.

A non-ventilated roof can also result in scorching attics, where extreme heat will eventually damage the underlayment, rafters, wood framing, and other materials. Keeping your roof ventilated evenly and efficiently allows hot air to escape, extending the life of your roofing system.

7. Final Clean Up

Your contractor will begin the cleanup procedure following the new roof installation. They will deposit all the debris on the dumping tarps by handheld blower to blow off the roof. This will help remove any debris and small grains that have fallen off the shingles.

It’ll also blow away the sawdust from cutting the vents for your ventilation system.

They’ll also clear any roofing debris from your drainage systems by blowing them out. They’ll recollect their tools, wrap the tarps, and clean everything in your backyard before leaving. They’ll use a strong magnet to ensure all the nails are collected. Your contractor even runs the magnet through the gutters to catch any loose nails.

8. Double-Check The Work

Your contractor will double-check the result after cleaning the mess they left behind during installation to ensure everything is perfect.  They’ll climb up on your roof, look around, and ensure the quality meets the high expectations you have for a roofing project. They’ll check for leaks near chimneys, skylights, gutters, and other ventilation vents.

A house with asphalt shingles

Hire Professional Roofing Services In Florida

As a homeowner, you want to ensure you get the best result out of your investment. That’s why you need to be careful when selecting a roofing contractor. Don’t just pick one who just patches it up and leaves but choose one who is honest and wants you to have a strong roof over your head.

looking for reliable roofing contractors in Florida? Look no further than Certified Pro Roofing. We’re a leading roofing company in Pensacola, FL, offering new roof installation services for metal roofing, asphalt roofing, and more. We also offer roof inspection services, roof repair services, and more in Florida.

We also believe that money shouldn’t come in between you and a good roof which is why we offer flexible financing solutions. We also know how frustrating it can be to wait for a Monday to get your home’s roof repaired, which is why we also offer emergency roof repair in Florida.

Reach out to us for affordable roofing services in Florida.

Call Now Button